The best way to remove paint from lap board siding 1.
Easy way to remove paint from wood siding.
Thoroughly clean the painted surface with degreasing cleaner dish soap or household cleaner and allow to dry.
This can sometimes then allow the paint to be more easily removed.
Removing paint with heat.
You can also use heat to remove exterior house paint.
Wind dissipates heat from the infrared stripper and lengthens the time.
If necessary remove any knobs hinges or other hardware from the wood being sanded.
Saturate all of the siding completely avoiding windows.
A heat gun or an infrared paint remover will heat up the paint so it peels effortlessly away from the wood.
Some simple tools can help you remove paint from wood rails and other intricate details.
Protect the siding from wind with a tarpaulin.
Sanding cords work like dental floss to remove residue from crevices in turned columns and spindles.
Clean the wire brush when finished clean the wire brush under running water.
Spray the painted wood siding thoroughly using a ladder to reach high areas if needed.
When all the paint is gone.
Once exterior siding thoroughly dried paint will be much easier to scrape off being much more brittle.
Once you ve scraped your way to the wood s surface apply mineral spirits with an old rag or paper towel and scrub off the remaining remnants of paint with steel wool.
If you are trying to remove paint from an exterior surface power washing can work but usually only removes already loose paint.
Whatever tool you use careful not gouging surface underneath.
Sweep the wire brush over the painted surface on areas of prominently peeling paint lightly sweep your wire brush.
The more brittle easier paint can be lifted up scraped chipped away.
If you apply by brush or roller work carefully and.
Best way to scrape paint off old paint on wood siding is first having a dried surface to work with.
Power washing can also risk damaging the surface that you are trying to remove the paint from if you get too aggressive.
Dental picks make it easy to dig out the remaining specks of debris that hide in nooks and crannies.
This is a great technique if you want to avoid sanding after scraping paint or you don t want to use chemicals.
You need that much clearance.
Start with coarse 80 grit sandpaper in a manual hand.